Perfection Corporation
h o m e p r o d u c t s c o m p a n y s a l e s c o n t a c t  u s
 
Riser Specs
Back to Anodeless Service Line Risers
Types of Risers  |  Riser Specs  |  PELT
 
 
 
Size

Pipe:
1/2" IPS to 12" IPS ASTM A53 type F and E grade A, schedule 40 and 80 steel (PELT-3/4" IPS ASTM 513, type 1, grade 1006/08/10 steel)

Tubing:
1/2" IPS to 12" IPS of any type
medium or high density polyethylene (PELT - 1/2" CTS)
Pipe Coating/Covering

Perfectacote: Stainless steel flake protective pipe coating (PELT - polymer jacket) Fusion bonded epoxy (FBE) Fusion bonded polyester (FBP) Galvanized
Length
Casing: Up to 8"
Rise Leg: Custom
Base Leg: Custom
Riser Types

Prebent
Straight
Flexible
Fusion Ell Wall-Sleeve
Outlets

Threaded
Weld-end
Flange
By-Pass
Options
Coiling Tubing
Tracer wire
Labeling
Bridging sleeve
Sun (UV) shield
Anodes
Vents
Centering sleeve
Riser support system
Inlets

Permasert:
1/2" CTS to 2" IPS

Fusion:
Socket and Butt
1/2" CTS to 12" IPS
Sealing

Double seal (below ground)
Testing and Compliance
Time proven Perfection anodless risers recieve extensive testing to ensure safe and reliable performance in the field, including a factory leak test to 150 psi. The gas-carrying steel pipe nipple meets the requirements of ASTM D-2513 category 1, ANSI B 1.20, ANSI B 31.8, US DOT Part 192, NFPA-58 and CSA B137.4.